Roof Replacement

When a roof system is beyond repair or restoration, or upon the building owners request we can install a re-roofing system. This can be done by a complete tear off or a roof overlay. As the building’s protection against the elements, the roof is not only the most vulnerable part of the structure, but its integrity is essential, as it ensures the contents of the building against weather damage.

The Roofers are the leading specialist for roof replacement systems in the GTA , our team of dedicated installers can provide an array of roofing applications including:

Roofing Systems

Built-up Roof Replacement MapleModified bitumen systems were developed in Europe during the 1960’s and were brought to the U.S. marketplace in the early to mid-1970’s.

The essence of the membranes is in the controlled manufacture of a heavy roofing sheet (usually 120 to 180 mils thick) employing multiple layers of asphalt and reinforced around a core of plastic (APP) or rubber (SBS) modifiers.

These systems are then installed by heat welding, using special torching apparatus or hot mopped into place using new or conventional methods of asphalt application.

The special characteristics of mod-bit systems are in their toughness, light-weight loading, and resistance to wind and fire. They also provide an easily inspected surface and long-term service expectancy. Because the multiple layers of roofing are built into one sheet, a great deal of the quality control is manufactured in the plant. However, good design and good roofing practices are still essential to the performance of this roofing system.

The Roofers specialize in the installation of “Mod-Bit” roofing systems across the GTA and Toronto area.

Built-up Roof Replacement MapleBuilt-up roofing (“B.U.R.”) has long been considered the traditional roofing material in the United States. It enjoys a long and illustrious track record of success. The multi-ply configuration provides additional layers of protection against moisture penetration along with somewhat of a self-sealing property during warm weather.

In a B.U.R., the felts act as reinforcement for the thin layers of waterproofing bitumen (asphalt or coal tar pitch).

The system is typically surfaced with aggregate (typically pea-gravel) set in a flood coat of bitumen for purposes of ultra violet ray, severe weather, and impact protection.

B.U.R. systems are durable, long lasting, and relatively resistant to construction and post construction traffic. They are appropriate for both new and replacement roofing.

The Roofers specialize in the installation of Built-up roofing systems in the GTA

1ply Roof Replacement VaughanThermoplastic polyolefin (TPO) roofing membranes are a type of commercial roofing product that offers benefits both in terms of installation – relatively simple compared to other roofing products — and performance – resistant to ultraviolet (UV) rays. The term polyolefin actually comes from two words – namely polymer and filler.

Blending polymer and filler, such as fiberglass, carbon fiber and rubbers, creates a TPO single-ply membrane that is resistant not only to UV rays, but also to ozone and chemical exposure. The Roofers staff professional and seasoned installers of all of our TPO roofing systems.

+ MODIFIED BITUMEN

Built-up Roof Replacement MapleModified bitumen systems were developed in Europe during the 1960’s and were brought to the U.S. marketplace in the early to mid-1970’s.

The essence of the membranes is in the controlled manufacture of a heavy roofing sheet (usually 120 to 180 mils thick) employing multiple layers of asphalt and reinforced around a core of plastic (APP) or rubber (SBS) modifiers.

These systems are then installed by heat welding, using special torching apparatus or hot mopped into place using new or conventional methods of asphalt application.

The special characteristics of mod-bit systems are in their toughness, light-weight loading, and resistance to wind and fire. They also provide an easily inspected surface and long-term service expectancy. Because the multiple layers of roofing are built into one sheet, a great deal of the quality control is manufactured in the plant. However, good design and good roofing practices are still essential to the performance of this roofing system.

The Roofers specialize in the installation of “Mod-Bit” roofing systems across the GTA and Toronto area.

+ BUILT-UP ROOFING

Built-up Roof Replacement MapleBuilt-up roofing (“B.U.R.”) has long been considered the traditional roofing material in the United States. It enjoys a long and illustrious track record of success. The multi-ply configuration provides additional layers of protection against moisture penetration along with somewhat of a self-sealing property during warm weather.

In a B.U.R., the felts act as reinforcement for the thin layers of waterproofing bitumen (asphalt or coal tar pitch).

The system is typically surfaced with aggregate (typically pea-gravel) set in a flood coat of bitumen for purposes of ultra violet ray, severe weather, and impact protection.

B.U.R. systems are durable, long lasting, and relatively resistant to construction and post construction traffic. They are appropriate for both new and replacement roofing.

The Roofers specialize in the installation of Built-up roofing systems in the GTA

+ 1-PLY

1ply Roof Replacement VaughanThermoplastic polyolefin (TPO) roofing membranes are a type of commercial roofing product that offers benefits both in terms of installation – relatively simple compared to other roofing products — and performance – resistant to ultraviolet (UV) rays. The term polyolefin actually comes from two words – namely polymer and filler.

Blending polymer and filler, such as fiberglass, carbon fiber and rubbers, creates a TPO single-ply membrane that is resistant not only to UV rays, but also to ozone and chemical exposure. The Roofers staff professional and seasoned installers of all of our TPO roofing systems.

Commercial Flat Roof Replacement Vaughan
Flat Roofing Repair

Your needs can be served through our skills and experience long after the roof has been installed by us or by other roof repair contractors.

READ MORE

Commercial Inspection Maintenance Vaughan
Inspection And Maintenance

We are also a roof inspection company that goes above and beyond by assigning you a friendly, knowledgeable account representative.

READ MORE

commercial roofing services|Roof Replacement Richmond Hill
Roof Replacement

When a roof system is beyond repair or restoration, or upon the building owners request we can install a re-roofing system. This can be done..

READ MORE